Inspecting your metal buildings for rain or hail damage, as well as damage resulting from snow and ice during the winter, is no easy feat. You’ll have to follow a few distinctive steps, if you want to be able to cover all the most essential points:
via Blogger Helpful Tips for Inspecting Your Steel Building for Weather Damage
Excessive heat can mess almost everything up, and you’ll find that some building materials are a lot more prone to heat damage than others. Fortunately, the metal used in the construction of metal buildings can withstand temperatures of well over 1,000 degrees without being damaged.
Now, it’s important to know what is meant by heat damage. Usually, if the building catches fire, we’re already speaking about fire damage, so that’s when the temperatures are highest. Heat damage, on the other hand, typically happens if there’s a powerful source of heat nearby or if the heat comes from the sun itself.
In the latter case, most buildings have to suffer as a result of discoloration and the fading of their paint – which can happen in the case of metal buildings. However, the heat and UV radiation of the sun, as well as any temperatures below 1,000 degrees, will hardly be able to land a single scratch on your new metal building. The most that can happen is that the metal can change its shape slightly and become somewhat larger when subjected to enough heat. This process of expansion, however, is quite common, and is accounted for by manufacturers.
Metals like steel, iron, aluminum and copper are extremely resilient, and apart from aluminum, which has its melting point around 660 C, all the other metals involved in metal building construction can withstand really high temperatures without any problems whatsoever.
For a great metal building company, look to CANAM STEEL BUILDING CORPORATION.
Article Source over here: Can Metal Buildings Actually Be Affected by Heat Damage?
via Blogger Can Metal Buildings Actually Be Affected by Heat Damage?
The terminology used over the years to describe a steel building has changed as this technology has progressed. As a result, many of these name changes have created confusion like: are we talking about a steel structure, a modular building, a prefabricated building or a metal-built system?
Each of these terms describes a type of structure that is pre-designed and partially assembled in a manufactory, but the fabrication process is a little different.
Modular buildings are three-dimensional segments for construction, produced in a factory. Some are completely modular and are also known as "building blocks", assembled together on site to create the final result: a steel building. Others are semi-finished, delivered like this to the construction site and assembled there.
Prefabricated buildings are finished and assembled in the manufactory.
This type of buildings emerged in the 1960s. Similarly to the previous types, they were pre-designed at the factory, due to the changes that had to be applied in some cases to standard designs. Buildings of this type also have standard openings, standard doors and windows and a similar design.
This category includes the most modern buildings used today ranging from small residential garages to large distribution centers, some with customized exterior, various finishes, with attics or other improvements. The term MBS has recently been introduced in the industry to describe the modern structural engineering concepts as well as the architectural principles used today for metal constructio
First Posted right here: The Process Of Fabricating Metal Buildings
via Blogger The Process Of Fabricating Metal Buildings
If you are interested to buy a metal shed, you must ensure that you make a good investment. You can do that if you have the right information to hand. Otherwise you may be one of those customers who are disappointed that their metal shed is not what they were expecting.
But first, let`s review the benefits of owning a metal shed: it is rodent and insect proof, resistant to rot as well as to wear and tear (metal will not crack or split). A metal shed is also fire retardant and virtually maintenance free and a sustainable building, which makes it very convenient.
Most people also invest in a metal shed because of the security it provides, although you must be aware that not all metal sheds offers the same level of security just because they are made of metal. The quality and thickness of the metal, as well as the accessories make the difference, so you should be willing to invest some money into quality instead of opting for the cheapest option. Cheap metal sheds are good for storage, but they do not provide too much security, so do not be mislead.
Regardless the type of metal shed you choose, make sure you get at least 15 year warranty, although for a highly secure shed made from quality materials and accessories, you should get a significantly longer warranty.
Originally Posted on: Investing In A Metal Shed
via Blogger Investing In A Metal Shed
Steel building manufacturers, visit company website, design and build various types of buildings for all applications. If you decide that a steel building is what you need, it is important to partner with a good manufacturer that provides you consultancy throughout the entire building process.
Here are some important questions to ask your steel building manufacturer.
Customers typically want to know technical details, such as whether steel is from recycled steel, the building is manufactured in 26 gauge steel on 5′ centers or in 29 gauge steel with framing on 2′ centers, if manufacturers use galvalume or lower quality galvanized steel etc.
Another important aspect you must talk about with your manufacturer is related to the warranty. Does it offer warranty? For how long? There are steel building manufacturers that offer even a 50 year structural warranty, which is probably the best in the industry.
If you want a stable structure that will last for a lifetime, you must also ask about the quality of the accessories and whether they are designed to withstand the elements for the life of the building.
If you are worried about the costs, make sure to ask your manufacturer how you can get the cheapest steel building. It is not recommended to go for the cheapest option though, because cheaper is not better, but if you are on a budget, you may want to take the risk. Your manufacturer may be willing to help you and design for minimum standards; this way, you will save on production costs.
Original Post over here: Questions To Ask Your Steel Building Manufacturer
via Blogger Questions To Ask Your Steel Building Manufacturer
For decades, the steel industry has reduced the need for raw materials and encourages the reuse of existing products. Steel is the most recycled material - more than all other materials (paper, plastic, aluminum, glass) combined.
The great metallurgical properties of steel allow recycling to continue, without decreases in performance. Thus, the use of recycled steel brings savings in terms of energy and raw materials, every time ore production can be avoided.
Two of three tons of new steel are made of old steel. The use of ore is still needed because there are many steel products remaining in service, as durable goods, for decades, while the demand for steel worldwide continues to rise.
Reusing steel products for construction
In the field of construction, another form of recycling is the re-use of steel products. Steel is not re-melted, but enters a new phase of product use. This process offers even greater environmental benefits.
Steel recycling has a huge impact on reducing CO2 emissions. Of all greenhouse gases, carbon dioxide (CO2) is relevant for the steel industry. Recycling significantly reduces the amount of CO2 emissions from extracting and processing ores. According to the World Steel Association, every ton of recycled steel reduces on average 1.5 tones of CO2 emissions and 13 gigajoules of primary energy.
First Seen over here: Different Ways To Recycle Steel
via Blogger Different Ways To Recycle Steel
Red barns are a common view, against green grass, in America. But why red? Where does this tradition come from?
There are many myths about it: some people say that this color used to help a farmer`s cows to find their way home, while others believe that it is simply an influence of Scandinavian farmers. However, there are no good arguments to sustain these believes, therefore it seems that, in the past, barns were painted red simply out of convenience and frugality. Paint protects the underneath material and farmers also noticed that it keeps a building warmer during the cold season. At first, they used to seal barns with linseed oil, but started to add lime and ferrous oxide, to kill fungi and mosses. The ingredients turned the mixture red and were also quite cheap, so red barns progressively became a tradition that continues today.
Other pigments for common outdoor use were zinc, lead and whiting (calcium carbonate); however, these were typically more expensive than ferrous oxide and did not last that long; calcium carbonate and lead fade pretty quickly and crack with time, so they were not that popular, since farmers were not eager to repaint their barns every few years.
Metal building manufacturer's offer a variety of styles and colors is metal buildings, see https://www.canamsteelbuildings.com/.
Article Source right here: Why Red Is The Most Popular Color For Barns
via Blogger Why Red Is The Most Popular Color For Barns
If you invest in a quality steel building from a wonderful company like CanAm Steel Building Corporation, you should also consider landscaping around it, in order to highlight it and keep it look nice. Landscaping is a factor that influences a lot the overall aspect of a building; it increases its value and curb appeal and does not cost you so much money as a complete remodeling project. However, people ignore it very often.
Allowing grass and some vegetation to grow around the building is not landscaping; if you are lucky, it might look nice, but otherwise wild vegetation is not an option if you want a great looking and functional building. You have to make some effort if you want it to fit in with the surroundings. A professional landscaper can help you have your property looking great in short order.
One of the first things that are taken into account is placing mulch or gravel around the base of the building. This not only ensures easy access, but also protects the building from being splashed with mud (if you do not have gutters, this problem will surely get worse, if not addressed properly).
Landscaping should not be limited to grass; the use of vegetation (shrubs, flowers trees), but also different types of walkways make a great addition to a metal building.
Article Source here: Landscaping Around Your Steel Building
via Blogger Landscaping Around Your Steel Building
The increasing occurrence of hail storms in the last decade have attracted the attention of researchers in the insurance sector, who need to be able to estimate the level of damage they are about to pay on a long-term basis.
Estimates from experts show that each year, hailstorms cause about $ 1.5 billion damage to residential roofs in the United States, not to mention the damage to other building components. Moreover, if their intensity is very high, natural disasters of this type are also the cause of other costly inconveniences such as business interruptions.
There are two major types of hailstorm damage that may occur to a metal building: aesthetic and functional. Aesthetic damage only affects the exterior aspect of the building, so it is not that expensive, while functional damage has adverse effects on the performance of the building, in most of the cases resulting in diminished water-shedding ability of different parts of the building and a reduction in its expected lifespan.
Signs of hail damage
Try to identify signs of impact on the roof, façade and other accessories made of soft metal, such as the condensing unit of the air conditioner. If the hailstones were not that large and dense, you will likely notice only small visual damage in the form of dents. However, if the hailstones were particularly large, you should also determine the risk of structural damage, with the help of Metal buildings specialists.
Originally Posted right here: How To Tell If Your Metal Building Has Hail Damage
via Blogger How To Tell If Your Metal Building Has Hail Damage
If you want to paint a steel building, it is important to know that you need to pay attention to a few details in terms of surface preparation. If the surface is not treated, it is recommended to completely remove rust by grinding or scraping with a wire brush. Subsequently, it will be necessary to thoroughly clean and remove oily substances, dust and mildew.
The paints you choose must be rust, weather and scratch-resistant, easy to apply so as to help you get the best results. These paints need to have a fast drying time, high adhesion to the substrate, provide good antioxidant protection, excellent coating, mechanical, chemical, and water resistance. They must form a wear-resistant layer that maintains its color and gloss in time.
What type of metal paint do experts recommend?
Here are some details about some of the best painting products for metal buildings.
First Posted over here: Choosing The Right Type Of Paint For Your Steel Building
via Blogger Choosing The Right Type Of Paint For Your Steel Building
Write something about yourself. No need to be fancy, just an overview.